Broadband deep-red-to-near-infrared emission from Mn2+ in strong crystal-field of nitride MgAlSiN3

Broadband near-infrared (NIR) phosphors have received increasing attention for fabricating phosphor-converted light-emitting diodes (pc-LEDs) as NIR light source. Most of the reported broadband NIR phosphors originate from Cr³⁺ in weak crystal field environments. Herein, we report a luminescent material, MgAlSiN₃:Mn²⁺ with CaAlSiN₃-type structure, demonstrating that broadband deep-red-to-NIR emission can be achieved via doping Mn²⁺ into crystallographic sites with strong crystal field in inorganic solids. This phosphor is synthesized via easy-handle solid-state reaction, and the optimized sample, (Mg_0.93Mn_0.07) AlSiN₃ shows an emission band with peak at ~754 nm, FWHM of 150 nm, and internal quantum efficiency of 70.1%. The photoluminescence intensity can further be enhanced by co-doping Eu²⁺ as sensitizer. This work provides a new strategy for discovering new broadband NIR phosphors using Mn²⁺ in strong crystal field as luminescence center.     

Crystal structure,phase compositions,and microwave dielectric properties of malayaite-type Ca1−xSrxSnSiO5 ceramics

Low-permittivity Ca_1−xSr_xSnSiO₅ (0 ≤ x ≤ 0.45) microwave dielectric ceramics were prepared via traditional state-reaction at 1400°C-1450°C for 5 hours. Moreover the microwave dielectric properties of SnO₂ ceramic were obtained for the first time. SnO₂ ceramic was difficult to densify, and SnO₂ ceramic (ρ_rel = 65.1%) that was sintered at 1525°C exhibited the optimal microwave dielectric properties of ε_r = 5.27, Q × f = 89 300 GHz (at 14.5 GHz), and τ_f = −26.7 ppm/°C. For Ca_1−xSr_xSnSiO₅ (0 ≤ x ≤ 0.15) ceramics, Sr²⁺ could be dissolved in the Ca²⁺ site of Ca_1−xSr_xSnSiO₅ to form a single phase, and the partial substitution of Ca²⁺ by Sr²⁺ could improve the microwave dielectric properties of CaSnSiO₅ ceramic. Secondary phases (SnO₂ and SrSiO₃) appeared at 0.2 ≤ x ≤ 0.45 and could adjust the abnormally positive τ_f value of CaSnSiO₅ ceramic. The highest Q × f value (60 100 GHz at 10.4 GHz) and optimal microwave dielectric properties (ε_r = 9.42, Q × f = 47 500 GHz at 12.4 GHz, and τ_f = −1.2 ppm/°C) of Ca_1−xSr_xSnSiO₅ ceramics were obtained at x = 0.05 and 0.45, respectively.     

Visible light-activated degradation of microcystin-LR by ultrathin g-C3N4 nanosheets-based heterojunction photocatalyst

Microcystins (MCs) is a harmful toxin generated by blue-green algae in water, which has seriously threatened the ecological safety of water and human body. It is urgent to develop new catalysts and techniques for the degradation of MCs. A feasible electrostatic self-assembly method was carried out to synthesize BiVO₄/g-C₃N₄ heterojunction photocatalyst with highly efficient photocatalytic ability, where BiVO₄ nanoplates with exposed {010} facets anchored to the g-C₃N₄ ultrathin nanosheets. The morphology and microstructure of the heterojunction photocatalysts were identified by XRD, SEM, TEM, XPS, and BET. The g-C₃N₄ nanosheets have huge surface area over 200 m²/g and abundant mesoporous ranging from 2-20 nm, which provides tremendous contact area for BiVO₄ nanoplates. Meanwhile, the introduction of BiVO₄ led to red-shift of the absorption spectrum of photocatalyst, which was characterized by UV-vis diffuse reflection spectroscopy (DRS). Compared with pure BiVO₄ and g-C₃N₄, the BiVO₄/g-C₃N₄ heterojunction shows a drastically enhanced photocatalytic activity in degradation of microcystin-LR (MC-LR) in water. The MC-LR could be removed within 15 minutes under the optimal ratio of BiVO₄/g-C₃N₄. The outstanding performance of the photocatalyst is attributed to synergetic effect of interface Z-scheme heterojunction and high active facets {010} of BiVO₄ nanoplates, which provides an efficient transfer pathway to separate photoinduced carriers meanwhile endows the photocatalysts with strong redox ability.     

Efficient removal of Congo red from pH-unregulated aqueous solutions by lignosulfonate-based polycatecholamine

Lignosulfonate-based polycatecholamine (PCEA-LS) was synthesized by a two-stage approach involving Mannich and catechol–amine reactions, and it was directly used to adsorb Congo red (CR) from the pH-unadjusted aqueous solution. PCEA-LS was characterized using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), and X-ray photoelectron spectroscopy (XPS). Various factors affecting on removal of CR by PCEA-LS were investigated in depth, including contact time, adsorbent dosage, and initial concentration of CR and adsorption temperature. The adsorption kinetics, isotherm, and thermodynamics of PCEA-LS for CR were explored in detail, and then its adsorption mechanism was systematically elucidated. Results indicated that the removal process of CR followed the pseudo-second-order kinetic model, and the isotherm data fitted the Langmuir model well. The maximum adsorption capacity reached 972.6 mg g⁻¹ at 30°C in the pH-unadjusted (pH = 6.25) solution possibly due to the hydrogen bond, π–π stacking, and electrostatic interaction between PCEA-LS and CR. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48640.     

Transformation of the reabsorption characteristics of lignite treated by low and high temperature drying process

Abstract

The reabsorption characteristics of the lignite treated by low and high temperature drying process were addressed in the paper. The information about the moisture form, functional groups, effective water-filled porosities and equilibrium moisture content of the lignite before and after the drying process was investigated using Differential scanning calorimetry (DSC), Fourier transform infrared (FTIR) spectroscopy, nuclear magnetic resonance (NMR) spectroscopy and a self-made reabsorption device, respectively. The results show that the low drying temperature (140, 190, 230?°C, 10?min, N₂) has little impact on the effective water-filled porosities of the resulted samples, whereas it has a great influence on the main oxygen-containing functional groups, which amount firstly decreases and then increases with the drying temperature increasing. In the case of the lignite samples dried under high-temperature (600, 700, 800?°C, 30?s, N₂), the amount of the effective water-filled porosity of the sample decreases and the amount of oxygen-containing functional groups increases as the temperature increasing. The reabsorption capability of the high temperature dried sample is much lower than that of the sample treated under low drying temperature. The reabsorption characteristics of the low-temperature dried samples are affected by the amount of the oxygen-containing functional groups, while the effective water-filled porosity is main factor for the lignite samples derived from high temperature drying process. Moreover, the work gives a good evidence that the high-temperature drying process is an effective choose for lignite upgrading.     

Representation learning in discourse parsing: A survey

Science China Technological Sciences - Neural network based deep learning methods aim to learn representations of data and have produced state-of-the-art results in many natural language processing...     

D-limonene Inhibits Pentylenetetrazole-Induced Seizure via Adenosine A2A Receptor Modulation on GABAergic Neuronal Activity

Background: Epilepsy is a chronic neurological disorder characterized by the recurrence of seizures. One-third of patients with epilepsy may not respond to antiseizure drugs. Purpose: We aimed to examine whether D-limonene, a cyclic monoterpene, exhibited any antiseizure activity in the pentylenetetrazole (PTZ)-induced kindling mouse model and in vitro. Methods: PTZ kindling mouse model was established by administering PTZ (30 mg/kg) intraperitoneally to mice once every 48 h. We performed immunoblot blots, immunohistochemistry (IHC), and high-performance liquid chromatography (HPLC) analysis after the behavioral study. Results: An acute injection of PTZ (60 mg/kg) induced seizure in mice, while pretreatment with D-limonene inhibited PTZ-induced seizure. Repeated administration of PTZ (30 mg/kg) increased the seizure score gradually in mice, which was reduced in D-limonene (10 mg/kg)-pretreated group. In addition, D-limonene treatment increased glutamate decarboxylase-67 (GAD-67) expression in the hippocampus. Axonal sprouting of hippocampal neurons after kindling was inhibited by D-limonene pretreatment. Moreover, D-limonene reduced the expression levels of Neuronal PAS Domain Protein 4 (Npas4)-induced by PTZ. Furthermore, the adenosine A2A antagonist {"type":"entrez-protein","attrs":{"text":"SCH58261","term_id":"1052882304","term_text":"SCH58261"}}SCH58261 and ZM241385 inhibited anticonvulsant activity and gamma-aminobutyric acid (GABA)ergic neurotransmission-induced by D-limonene. Conclusion: These results suggest that D-limonene exhibits anticonvulsant activity through modulation of adenosine A2A receptors on GABAergic neuronal function.     

高落差粉尘扩散规律和分布特征

高溜井放矿过程中会形成强大的冲击气流引起粉尘扩散，造成严重的井下环境污染，对其进行有效治理一直是井下通风除尘的工作重心，本工作利用相似实验和数值模拟相结合的方式探究溜井放矿过程中粉尘的扩散规律和分布特征。通过改变放矿质量、矿石粒径、溜井密闭程度、含水率等因素测试不同条件下气流大小和粉尘浓度分布，并利用CFD-DPM耦合方法模拟卸矿过程中的气?固两相流，研究气流和粉尘浓度时空分布特征。结果表明，最大粉尘浓度和风速随放矿质量增加而上升，随颗粒粒径和溜井密闭程度增大而降低，且含水率越大，粉尘浓度越小，风速无明显变化，在放矿过程中矿石颗粒之间碰撞占主导作用，颗粒流呈横向分布。     

整体壁板离散填料滚弯成形有限元模拟

具有一定曲率外形的铝合金整体壁板属于典型的多筋零部件,传统弯曲成形工艺成形困难,容易产生多种缺陷。提出了离散填料辅助滚弯成形整体2A12T4铝合金壁板滚弯工艺,并通过实验与整体填料滚变成形进行了对比,同时采用有限元模拟技术,探究了离散填料辅助整体壁板滚弯成形中的影响因素。研究结果表明:填料数量、上下垫板厚度等因素对成形性能影响较大,填料在3~6块时成形稳定,可以有效地避免筋条屈曲与失稳;随垫板厚度增加,壁板表面圆弧更加光滑、连续,但是回弹性增强;上下垫板分别在10~20 mm厚度时,综合性能较好。通过离散填料辅助滚弯技术可以成形出质量较高的整体壁板。